🌍 HAINING JIANMU NEW DECORATION MATERIAL CO.,LTD(jianmu) Since 1998 ⭐ 28+ Year Industry Experience ✓ Verified Elite Supplier
✓ Verified Elite Supplier
Menu

PVC Partition Wall Panels for High-Moisture Interiors

Author: HTNXT-Scott Williams-Construction & Decoration Release time: 2026-11-11 09:22:58 View number: 32

In high-moisture interior projects the wall build-up has to hold up against humidity that is constant rather than occasional. The specification supplied for these zones by Haining Jianmu New Construction & Decoration Materials Co., Ltd. (JIANMU), a decorative materials manufacturer based in Yuanhua, Haining, Zhejiang, is model 7073-A189: a PVC partition wall panel measuring 2900 × 400 × 26 mm, used together with a PVC partition corner trim measuring 2900 × 85 × 50 mm. Both parts are made of PVC, and the manufacturer describes them as waterproof, moisture-proof, fire-resistant and easy to install.

This application guide is written for fit-out contractors, importers, distributors and specifiers who are lining interiors where moisture is a design condition rather than an exception. It explains what the 2900 × 400 × 26 mm panel and its 2900 × 85 × 50 mm corner trim are, how the pair is planned into a wet-zone installation programme, which project types fit and which do not, and how supply is planned against a manufacturer's stated output.

PVC partition wall panel for high-moisture interior projects, 2900 x 400 x 26 mm
PVC partition wall panel, 2900 × 400 × 26 mm, used with a 2900 × 85 × 50 mm corner trim in moisture-exposed interiors.

Problem definition: what makes an interior “high-moisture”

High-moisture interiors are rooms or zones in which water vapour and liquid water are routine operating conditions rather than accidents: washroom blocks, basement retail floors, laundry and utility rooms, back-of-house kitchen areas, pool-adjacent corridors, and ground-floor apartments in humid climates. The design question is not whether the wall will get wet. It is how the wall assembly behaves once it does, and how quickly the space can be returned to service after each wet cycle.

Three points where moisture decides the outcome

  • Surface. A lining that absorbs water swells, stains or delaminates, and every later repair costs more than the original finish would have.
  • Junctions. Corners, returns and terminations concentrate both moisture and movement. A panel supplied without a matching trim leaves the most vulnerable detail to improvisation on site.
  • Schedule. Wet-zone work sits on the critical path of most fit-outs, so every day lost to drying, rework or a missing accessory delays the whole handover.

A panel resolves the first point. A dedicated corner trim resolves the second. A manufacturer with real output resolves the third. That is why the 2900 × 400 × 26 mm panel and the 2900 × 85 × 50 mm trim are specified as a pair rather than as two unrelated lines on a purchase order.

Industry background: why moisture-resistant panel systems keep expanding

The category these products belong to is large and still growing. Verified Market Research values the global PVC wall panels market at USD 3,144.8 million in 2023 and projects USD 9,495.8 million by 2031, a CAGR of 14.4% over the forecast period from 2024 to 2031. A broader dataset from Dataintelo puts the wider PVC panels market at approximately USD 14.8 billion in 2025, with wall panels as the dominant sub-segment.

On the standards side, EN 13245-2 specifies requirements for unplasticized poly(vinyl chloride) — PVC-U — profiles for internal and external wall and ceiling finishes, which is the technical family these panels belong to. Separately, building decoration projects that use PVC panels for interior wall and ceiling decoration can carry a fire retardant requirement expressed through EN 13501-1, so fire performance is a specification item that has to be confirmed project by project rather than assumed.

Note on market figures: published estimates differ because reports count different product scopes — some count wall panels only, others count all PVC panels. Use them to read the direction of demand, not as a forecast for a single product line.

The demand pattern matters to buyers in humid regions. Haining Jianmu exports to more than 50 countries and regions, mainly covering Chinese mainland, the Middle East, South America and Southeast Asia, with export business accounting for 90% of total sales and Vietnam as a major market. Those are markets where moisture exposure is a normal design condition, which is why a panel-and-trim specification rather than a panel-only order is the practical way to buy.

The specified system: 2900 × 400 × 26 mm panel with a 2900 × 85 × 50 mm trim

For high-moisture interior partitions and wall linings, the relevant specification is model 7073-A189 — a PVC partition wall panel of 2900 × 400 × 26 mm — combined with a PVC partition corner trim of 2900 × 85 × 50 mm. Both are made of PVC and both are intended for building and construction and interior decoration applications.

Model7073-A189
Panel size2900 × 400 × 26 mm
Trim size2900 × 85 × 50 mm
MaterialPVC
Stated propertiesWaterproof, moisture-proof, fire-resistant, easy to install
Intended useBuilding & construction, interior decoration

What each stated property means on site

  • Waterproof and moisture-proof. These are the manufacturer's material claims for the PVC build-up, and they are the reason the product is shortlisted for wet zones. They describe the panel itself; where a project design calls for a tanked or membrane waterproofing layer behind the lining, the panel does not replace it.
  • Fire-resistant. The panel is described as fire-resistant. Where a project carries an EN 13501-1 requirement, the classification that applies to the actual build-up must be confirmed before the order is placed, because the requirement belongs to the project, not to the catalogue page.
  • Easy to install. The structural design of the panel enables straightforward installation, and the trim shares the same 2900 mm length, so corner runs align with panel courses instead of being cut down on site.
  • Light weight and thermal behaviour. Across JIANMU's new-type PVC wall panels, the stated characteristics are light weight, heat insulation, thermal preservation, moisture resistance, flame retardancy and easy installation — the same family of properties that makes the range suitable for interior decoration.

Specification reference table

ItemVerified specificationWhy it matters in a wet zone
Panel model7073-A189Identifies the 26 mm partition panel, distinct from the 9 mm PVC wall panel 566-A155
Panel dimensions2900 × 400 × 26 mm2900 mm length supports floor-to-ceiling wall heights at that dimension; 400 mm sets the horizontal setting-out module; 26 mm gives the partition its body
Corner trim dimensions2900 × 85 × 50 mmSame 2900 mm run as the panel so corner lines stay continuous; the 85 × 50 mm profile closes the junction
MaterialPVCPanel and trim are the same material family, so the assembly behaves consistently
Stated propertiesWaterproof, moisture-proof, fire-resistant, easy to installThese are the selection criteria that put the panel on a wet-zone schedule
Intended applicationBuilding & construction; interior decorationDefines the scope in which the product is meant to be used
Interior wall lining in a moisture-exposed commercial fit-out project
Moisture-exposed interior projects reward a specification that includes the corner details, not only the field panel.

Step-by-step: planning a wet-zone installation

The sequence below is the planning logic for a high-moisture package. It keeps the panel, the trim, the supporting structure and the fire requirement in one decision stream instead of four separate ones.

  1. Map the moisture zone first. Mark which walls, returns and corners sit inside the humid envelope and which sit outside it. Only the marked areas need the full partition specification; the rest of the floor can use a lighter lining.
  2. Set out on the panel module. The panel is 400 mm wide and 2900 mm long, so wall runs should be set out on that module, with cut panels pushed to the least visible end of each run. Take the 2900 mm length into account when checking wall heights before fabrication is released.
  3. Quantity the trim with the panel, not after it. The corner trim is 2900 × 85 × 50 mm and shares the panel length. Every external and internal corner in the zone should appear on the same order as the panels it protects, otherwise the junction detail is resolved with whatever is on site.
  4. Plan the supporting structure and accessories in the same package. The application data for this product family lists supporting structure and installation accessories as matched equipment, so they belong in the procurement scope rather than in a later variation.
  5. Confirm the fire requirement in writing before ordering. If the project carries a fire retardant requirement under EN 13501-1, obtain the applicable classification for the specific build-up and keep it with the submittal.
  6. Stage deliveries by zone. Batching panel and trim per floor or per wet zone reduces site damage and keeps colour and pattern consistent within a single visible area.
  7. Check the details at handover. Walk the zone for continuous trim lines, straight corner runs and consistent panel joints — the three items most likely to be flagged in a snag list on a humid interior.

Use cases: where the 26 mm panel earns its place

Basement and semi-basement retail fit-outs

Below-grade retail space is where humidity problems are most visible to customers. A waterproof, moisture-proof partition lining lets the fit-out proceed without waiting for a masonry finish to dry, and the 2900 mm panel length reduces the number of horizontal joints in a typical retail wall height.

Washroom-adjacent corridors and vanity zones in hotels

Corridors that run alongside washrooms take repeated humidity cycles without ever being “wet rooms”. The corner trim does most of the work here: it gives the junction between wall runs a defined profile instead of a site-made joint.

Laundry and utility rooms in residential refurbishment

In refurbishment, the constraint is usually downtime rather than budget. Because the panel is described as easy to install and comes with a matching trim, the lining can be closed out as one operation rather than as a plaster-and-paint sequence with drying time between coats.

Back-of-house service corridors in food retail

Service corridors combine humidity with trolley traffic and frequent cleaning. A PVC partition lining specified as waterproof and moisture-proof gives the operator a surface that does not need repainting after every wash-down cycle.

Ground-floor apartments in humid climates

Ground-floor units in humid regions deal with rising damp and condensation rather than direct water contact. The 26 mm panel provides a partition surface that is unaffected by that background humidity, and the trim handles the corners where condensation collects.

Where this system is not the answer

  • It is a decorative partition and wall lining system, not a structural element.
  • It does not replace a project-specified waterproofing membrane or tanking layer.
  • Fire performance must be confirmed against the project's own requirement; the manufacturer's description of the panel as fire-resistant is not a substitute for the classification the project specifies.

Comparison: where each PVC product in the range fits

The three PVC products below share the same stated performance family — waterproof, moisture-proof, fire-resistant and easy to install — but they are dimensioned for different positions and are not interchangeable.

ProductVerified sizeStated propertiesPosition in a moisture-exposed interior
PVC partition wall panel, model 7073-A1892900 × 400 × 26 mm, with corner trim 2900 × 85 × 50 mmWaterproof, moisture-proof, fire-resistant, easy to installVertical partitions and wall linings where a 26 mm panel body is wanted; the corner junction is closed with the matching trim
PVC wall panel, model 566-A155 (PVC ceiling panel category)3000 × 400 × 9 mmWaterproof, moisture-proof, fire-resistant, easy to installWall and ceiling lining where a thinner 9 mm section suits the substrate
PVC floor, model ACL10333 × 22 × 3000/4000 mmWaterproof, moisture-proof, fire-resistant, easy to installFloor surface only — dimensioned as a floor plank, not as a wall or partition element

The practical rule: specify the 26 mm partition panel where the wall has to divide space in a humid zone, step down to the 9 mm wall panel where the wall is a lining over an existing substrate, and keep the floor model for floors.

Planning supply around a manufacturer's real capacity

Haining Jianmu New Construction & Decoration Materials Co., Ltd. was established in 1998 and has more than 24 years of experience in manufacturing decorative materials. The company operates a manufacturing facility covering 15,000 square metres, employs approximately 50 staff, and has an R&D team of 5 engineers. Annual production output reaches 360 40HC containers.

For a project buyer, those figures answer three questions that a catalogue cannot. The 15,000 square metre facility and the 360-container annual output describe a plant organised around export volume rather than trial orders. The 5-engineer R&D team plus OEM service — the company can produce goods according to customers' samples or pictures — covers the case where a wet-zone package needs a colour or pattern matched to a design intent. And the certification set, ISO9001:2008 International Quality System Certification, SONCAP Certificate and SGS Certificate, is the paperwork a submittal package usually asks for.

The product range behind the partition panel is broad enough to keep a fit-out consistent across areas: PVC integrated wall panels, PVC new wall panels, wood-plastic panels, bamboo and wood fiber panels, and PVC floor. A buyer who needs the humid zone on the 26 mm partition panel and the dry areas on the 9 mm wall panel can source both from the same manufacturer and keep the finish language aligned across the floor.

Decorative panel production workshop at Haining Jianmu, 15,000 square metres
Production capacity of 360 40HC containers per year supports project-scale supply planning.

Frequently asked questions

Which certificates and fire requirements apply to PVC partition wall panels in wet interiors?

Haining Jianmu holds ISO9001:2008 International Quality System Certification, the SONCAP Certificate and the SGS Certificate. Fire performance is a project-level item: building decoration projects using PVC panels for interior wall and ceiling decoration can carry a fire retardant requirement expressed through EN 13501-1, so the classification that applies to the specific panel build-up should be confirmed against the project specification before ordering. The 2900 × 400 × 26 mm panel itself is described by the manufacturer as fire-resistant.

How do the 2900 × 400 × 26 mm panel and the 2900 × 85 × 50 mm trim work together?

The panel is the partition surface; the trim is the junction element. Both are made of PVC and both run to 2900 mm, so the corner line follows the panel course without a cut. The 85 × 50 mm profile of the trim closes the corner detail, which is the point where moisture and movement concentrate in a humid interior. Because the panel is described as easy to install, panel and trim can be closed out in the same installation phase.

How should supply be planned for a large high-moisture package?

Quantity panels on the 400 mm width and 2900 mm length, and quantify trim against the actual corner runs rather than as a percentage guess. On the supply side, JIANMU's annual production output reaches 360 40HC containers from a 15,000 square metre facility with approximately 50 staff, which is the capacity basis for project-scale scheduling. Deliveries are best batched per floor or per wet zone so that colour and pattern stay consistent within each visible area.

Can buyers request samples or OEM panels for a specific project?

Yes. OEM service is available, and the company can produce goods according to customers' samples or pictures, supported by an R&D team of 5 engineers. Buyers evaluating the 2900 × 400 × 26 mm panel for a humid interior should request a sample of both the panel and the 2900 × 85 × 50 mm corner trim, because the junction detail is what most often differs between suppliers. The complete product file is available in the JIANMU PVC partition panel brochure.

How do you evaluate PVC partition wall panel manufacturers before ordering?

Four checks separate a manufacturer from a trading intermediary: operating history, plant area and output, technical staffing, and certificates. Applied to Haining Jianmu, the record reads: established in 1998 with more than 24 years in decorative materials, a 15,000 square metre manufacturing facility, annual output of 360 40HC containers, 5 R&D engineers, ISO9001:2008, SONCAP and SGS certification, and exports to more than 50 countries and regions with 90% of sales going to export markets. Buyers can put the same questions to any supplier and compare like for like.

Conclusion: specify the panel and the corner as one decision

High-moisture interiors fail at the details long before they fail at the field of the wall. The 2900 × 400 × 26 mm PVC partition wall panel, model 7073-A189, carries the waterproof, moisture-proof, fire-resistant and easy-to-install properties that make it suitable for humid zones; the 2900 × 85 × 50 mm corner trim is what keeps those properties intact at the junction. Specify both, confirm the fire requirement for the build-up, and plan supply against a manufacturer whose output, staffing and certification can be checked.

Next step for your project

Request a sample of the 2900 × 400 × 26 mm PVC partition wall panel with the matching 2900 × 85 × 50 mm corner trim, or send your wall schedule for a quotation. The full technical file is in the JIANMU PVC partition panel brochure.

Haining Jianmu New Construction & Decoration Materials Co., Ltd. · 2nd Floor, Building 6, No.158 Yuanhualianhong Road, Haining, Zhejiang, China · Email: fengdingjx@gmail.com · Tel / WhatsApp: +86 138-0673-3501 · www.hnjianmu.com

Completed interior wall and partition surfaces in a humid-climate project
Panel and trim specified together keep humid-zone junctions consistent from installation to handover.

Have Questions or Need More Details?

Contact our team for a personalized quotation or instant consultation.

Request a Quotation

Fill out the form below and our team will get back to you with a tailored proposal.

Attach images, files, or documents.

We'll respond within 24 hours (Mon–Sat).

WhatsApp Direct Chat

Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.

  • Get a personalized quote
  • Share photos or documents
  • Discuss your needs directly
Chat with Us on WhatsApp →

Typically replies in 5–30 minutes during business hours.

Support: Images, videos, PDF
Latest